If you are having trouble with your Tampa heat pump, you may be surprised to learn that it is probably not the heat pump that is to blame, especially if the trouble is that it simply won’t start up. That seems counterintuitive, but it’s true: the heat pump can be in perfect working order but still not turn on.
The good news, then, is that your heat pump is fine and you won’t have to pay to fix or replace it. Still though, these types of problems can very frustrating to diagnose and correct. Here are four common culprits when a heat pump won’t start:
- No power to the heat pump. Check your breaker box to see if the circuit breaker was tripped. If so, reset it and see if that fixes the problem. Another possibility is that your heat pump is wired to a wall switch, or that there is a switch on the unit itself. Make sure the switch is turned on.
- Make sure the thermostat is set to the proper mode, such as “heat” mode if you desire more heat. It seems overly simple, but sometimes the trouble is as simple as that.
- A recently replaced thermostat. If you recently upgraded or replaced the thermostat in your home, it’s possible that something went wrong that is preventing your heat pump from starting. It may be the wrong kind of thermostat – heat pumps require a specific type – or it may have been improperly wired.
- Finally, the heat pump may have its own circuit breaker on the air handler cabinet. This is often the case with heat pumps that have supplemental electric elements. If that breaker is tripped, that could cause the problems you are experiencing.
If you exhaust these problems and the problem persists or recurs – for example, if the circuit breaker trips again – call a Tampa contractor to work on your heat pump. There may be something larger at work that is causing problems in the electrical system that controls your heat pump, and that requires some expertise to properly address.