Posts Tagged ‘Gibsonton’

Common Types of Air Cleaning Devices: A Guide from Gibsonton

Monday, November 21st, 2011

In recent years in Gibsonton, you’ve likely heard dozens of warnings from newscasters, community publications and local contractors about the dangers of indoor pollutants. That’s a good thing: the air in your home, if left untreated, can be a significant health risk to you and your family. But, how do you choose an air cleaner that will get the job done? Let’s take a closer look at the options currently available and what each of them has to offer.

Air Filters

Air filters are the simplest form of air cleaning. They are designed to capture particles that stay airborne long enough to reach the filter. They don’t work well to capture all large particles, however, because they tend to settle before they reach the filter device. Proper air flow is necessary to supplement the process and remove more pollutants.

High efficiency filters with an MERV rating of 14 or higher are recommended, though HEPA filters (which have an MERV of 17-20) are preferred for their ability to capture particles as small as 0.3 microns. In-duct particle removal is a good upgrade as well because it filters moving air and captures more particles.

UVGI and PCO Cleaners

These cleaners are designed to kill pollutants like bacteria and mold. They are usually installed in the ductwork or air cleaner and while the effectiveness of either has yet to be properly measured there is a growing trend to include them in systems where homes experience a large number of allergic reactions or asthma symptoms.

Ozone Generators

There are still some systems that produce ozone as they circulate air back and attract it to a filter for removal. The results are mixed and ozone itself can be a significant irritant to the lungs, so it’s unclear whether these actually work very well.

Which Is Best?

It really depends on the pollutants you’re trying to remove. The best course of action is to discuss with a contractor the best combination of technologies to remove pollutants from your indoor air.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

4 Ways to Improve IAQ and Reduce Air Pollution: A Guide From Sydney

Wednesday, October 5th, 2011

Your Sydney home could be a haven for pollutants that can cause irritation to the upper respiratory system of anyone who comes inside. These allergens and pollutants are easy to remove however by taking some simple steps such as the four listed below:

  1. HEPA Filtration: Step one is to use HEPA filtration to remove as much of what is on the floor as possible through vacuuming. HEPA vacuum cleaners can remove years of cleaners, solvents, dander, mineral build ups and other toxins that tend to accumulate in spaces that normal vacuums cannot reach. It may be a bit of an investment, but a high powered vacuum cleaner can have a tremendously positive impact on your lifestyle and reduce pollutants.
  2. Stop Outside Stuff from Coming In: Some of the worst pollutants your home will face are from outside. So, make sure you have doormats at every door and that your family and friends remove their shoes before coming inside. You can have a second mat inside as a friendly reminder that cleaning the shoes is not an option but a strict necessity.
  3. Humidity Helps: Humidity levels between 30% and 50% reduce the presence of dust mites, molds, bacteria and many other indoor pollutants. Air conditioning in the summer is helpful to reduce humidity, though a dehumidifier is recommended for those days when the temperature doesn’t justify full blown air conditioning. Additionally, look for sources of excess humidity like leaky pipes, standing water, or clothes drying.
  4. Cut the Chemicals: There are a number of high quality household cleaners that don’t contain chemicals. Avoid ammonia, bleach and other chemical laden cleaners that can inflame allergies and pollute the water supply. Your home will be just as clean and you won’t feel uncomfortable afterwards.

Proper cleaning and careful selection of compounds and what goes into your air will help you avoid creating new air quality problems in the house. Done right, this process will make everyone in your home feel more comfortable.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

Steps to Take When Your HVAC System Breaks Down: A Guide From Wimauma

Friday, August 26th, 2011

Imagine this: it’s a sweltering summer day in Wimauma. The humidity outside is obscene, hitting you like a wall when you open the door. So, the only place you want to be is on the couch with the cool air conditioned air being blown across your face. Sounds pretty good doesn’t it? Now, imagine what happens when your air conditioner stops working.

A breakdown in your HVAC system is the absolute last thing you want to experience on a day where the mercury dings 90+ but it can happen, and the only way to ensure things don’t get out of hand is to take the following steps.

  1. Check Common Problems: While the system itself could be broken, make sure there are no other issues involved. Frequently, the electricity supply can be interrupted by a power surge or a tripped breaker. In both cases, you can usually get the system back online by yourself. However, you should call an electrician to inspect it as soon as possible.
  2. Does it Turn On: If the air conditioning system turns on and simply doesn’t provide enough cooling for your home, it is likely a problem in the unit. In this case, check other common problems. Clogged filters can severely reduce efficiency and if the system freezes over, it may stop providing enough cooling.
  3. Still Not Working? : If the system refuses to turn on and there are not clear problems that you can fix yourself, it’s time to call a professional. A professional HVAC contractor should be available almost any day of the week for emergency calls like this. Of course, in the middle of a heat wave or cold snap, it’s very likely that they may be booked up for a couple days. To avoid this happening, have routine maintenance done as often as recommended to avoid the possibility of being without cooling or heating indefinitely.

A good HVAC system is the only thing standing between you and discomfort, or worse, danger to your health. Don’t let the system go into such disrepair that you can’t use it at all.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Looking at Moving to a New House: What to Look for in HVAC and Plumbing

Wednesday, July 27th, 2011

What are the Minimum Efficiency and Maximum Age of a Furnace?

Most homeowners overlook simple things like the maintenance and age of their furnace. However, if you know exactly what your furnace should do and how long it should last, you’ll be better prepared to setup your maintenance visits and start looking for a new model. So, how do you tell what your furnace should provide? Here are some easy tips.

The AFUE Rating

Furnaces built in the last 20 years come with an AFUE rating that tells you how much of the fuel they consume is effectively converted into heat. If your home’s furnace has an AFUE of 80% that means it will effectively convert 80% of the fuel it consumes into heat. However, if your furnace has an AFUE of 98% it will convert 98% of the fuel it consumes into heat.

These ratings are designed to show you what to expect from your system from month to month. If the furnace suddenly starts using far more energy and produces the same amount of heat, you know that the AFUE is no longer accurate. It’s either a sign of a problem or that your furnace needs to be replaced.

Maximum Age

No manufacturer likes to give a maximum age for their furnaces because they can last for much longer than originally rated in many cases. However, most furnaces will come with at least a 10 year limited warranty for the heat exchanger and a 10 year limited warranty for the parts. So, if you take good care of your system, they expect it to last at least 10 years.

However, if you maintain your system annually, check the filters throughout the winter and don’t push it too hard when it gets cold out, your system could last even longer than the limited warranty, allowing you to enjoy an efficient furnace for years to come.

Moving In

While you’ll have your new home inspected, a working furnace doesn’t necessarily mean a good furnace. Make sure to learn just how old the furnace is, how much maintenance it needs, and the level of efficiency you can expect. It may be in your best interest to simply have it replaced now and start saving on your energy bill immediately instead of two or three years down the road as it continues to get worse.

Tags: , , , , ,
Posted in Home Savings | Comments Off

A Different Way to Zone Your Heating

Monday, July 25th, 2011

One of the most frustrating things about traditional heating is that you must pay for the entire home to be heated. You flip on the thermostat and you get the same temperature for every room. Vent covers can reduce how much heat gets to each room, but if you want one room to be cooler than another, how do you do it without installing an expensive zone control system?

Vent Levers for Adjustable Air Flow

The easiest way to control the flow of air in your heating system is to use a vent lever adjustable air flow system that allows you to actually control where the air goes. These systems are installed directly on your furnace’s air handler. Each vent lever can be attached to a specific thermostat in your house or the vent levers can be opened and closed manually from the basement. When one of the thermostats is turned off, a vent lever will close off air flow to that particular room and stop any heat from being distributed there.

The system itself is not as easy to use as a zone control system but because the technology is simple and it takes only a few seconds to the turn the vent levers, it’s a viable and effective method to control your heating if you cannot afford zone control. If you’re not sure whether this is a good solution for your particular furnace, an HVAC contractor can help.

How to Get Vent Levers Installed in Your Home

If this sounds like a good solution for you, take some time and contact your local HVAC service provider to learn more about what it takes to have vent levers installed. For some systems it is relatively easy to add them to an existing air handler. In older systems or in the case of a boiler, you may need to install more specific types of handlers to control the flow of heating to each room in your home. A professional can give you a better idea of what your home needs and how it can best be setup.

Tags: , , , , ,
Posted in Home Savings | Comments Off

Mechanical or Forced Ventilation vs. Natural Ventilation

Monday, June 20th, 2011

Just about everyone can agree that effective ventilation is essential to maintaining a healthy indoor living environment. But exactly what does this entail? There are quite a few ways to circulate air throughout your home, and each method is appropriate for a specific situation.

Benefits of Natural Ventilation

Natural ventilation, of course, can be achieved simply by opening a window. But there’s actually a lot more to it than that. If you really want to ventilate your home through natural means, then you’ll have to learn to take advantage of the differences in pressure in different areas of your home.

One way to do this is to use cross ventilation. This means opening windows or doors on both sides of your home and allowing the outdoor air to blow through, carrying stale, indoor air out the other side. A more sophisticated version of this is stack ventilation.

In a two-story home, stack ventilation can be achieved by opening the windows on the bottom floor on one side of the house and on the top floor on the opposite side. Because of the differences in outdoor air pressure, air will be sucked in through the lower floor windows and out through the upper ones.

Why Natural Ventilation Is Not Always Practical

These types of natural ventilation can be extremely effective when it comes to both cooling an indoor environment and removing indoor air contaminants. Unfortunately, allowing outdoor air inside unimpeded allows outdoor contaminants easily as well.

On particularly hot or humid days, natural ventilation can’t reduce the indoor temperature enough to make it comfortable indoors. While a light breeze is enough to take the edge off on a moderate spring or summer day, more is needed when the weather is extreme.

Types of Mechanical Ventilation

When you think of mechanical ventilation, you probably jump right to large central air conditioning systems. But that’s certainly not the only type of effective mechanical ventilation available. In fact, mechanical ventilation can be performed by just about any type of fan on the market, and while operating a fan is certainly more expensive than opening a window, it’s still much more affordable than running an air conditioner all day long. Fans can also be used in combination with natural ventilation to achieve better results than either system could on its own.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

How to Stay Affordably Cool This Summer

Monday, June 13th, 2011

Putting in a high quality, energy efficient air conditioning system is a great step to take when you are trying to keep your house cool and comfortable all summer without paying a fortune in cooling costs. Many of the latest air conditioners are able to use very little energy to provide powerful cooling power to your house no matter how big it is.

But if you are really serious about keeping cool and keeping costs down, there are plenty of other things you can do to give your air conditioning system a hand. It might seem silly, but putting in a little bit of effort around the house can save you quite a bit in the long run.

For instance, since you are paying to keep the air in your house cool, it is a good idea to make sure that the air you are cooling stays in your house. Sealing off unused doors and windows with plastic is an excellent precaution to take to ensure that no cooled air leaks out through the cracks and door jambs. Also, you will want to check for any other openings that could create a draft and allow cool air to escape or warm air to get in.

However, just letting in air from outside in the summer is not the only way that the heat can get in. The sun is powerful in the summer and the more you can block of it, the cooler your house will be. So make sure that your blinds are closed to block out the sun, particularly in the afternoon. Morning sun is not nearly as powerful as the sun you get towards the middle and later part of the day.

All of these steps will help to take the pressure off of your air conditioning system and allow it to get its job done with a minimum of energy expended. And that will certainly save you money every month. You can save even more, though, by adjusting the temperature on your thermostat a bit as well.

Most air conditioning systems are set to a default temperature of 72°F. While this is probably quite comfortable for you, it is likely that you would be equally as comfortable at 75°F. In fact, you probably will not even notice the difference. But that small adjustment can actually save you quite a bit on your monthly cooling bills.

Tags: , , ,
Posted in Air Conditioning | Comments Off

IAQ Systems: Can They Help Get Rid of Bed Bugs?

Monday, June 6th, 2011

Indoor air quality systems are designed to remove a lot of unwanted contaminants and allergens from your home. But, they can also help remove some unwanted pests. Dust mites, for example, can only survive in humidity of 50% or greater. But, what about bed bugs – a much larger problem for many homeowners? Can you get rid of them with your air quality system?

Bed Bug Facts

Bed bugs come into your home on clothing, luggage or other people. They don’t sprout out of any one particular condition, so no matter how clean your house is, you can be exposed to bed bugs at work, on the train, or when visiting friends. Once you’re exposed, it is very easy to bring them into your home where they quickly spread to the rest of the family.

Bed bugs don’t generally live far from people, so you won’t find them in dirty ducts or hiding in your air vents very often. That makes it even harder to get rid of them without a full blown fumigation of your home. However, there are some things your indoor air quality system can do that will make a difference.

Indoor Air Quality Actions to Take

Bed bugs don’t just thrive on your family, but on the conditions in which you live. They’ll get into the nooks and crannies of your furniture and your clothing and wait until night fall to come out and bite. So, one of the easiest things you can do is utilize a complete air filtration system to remove all the extra debris and dust that builds up in your home.

Humidity control will also make it easier to clean your mattress and the surrounding areas with a HEPA certified vacuum cleaner. If you have ductwork, make sure it is cleaned regularly. While bed bugs don’t hide in duct work very often, some will and every bed bug you can destroy is one less that will bite you.

Finally, avoid any pesticides while your family is in the house. Pesticide exposure is a common cause of illness in children and pets. It can be avoided with careful attention to indoor air quality and cleanliness. If you need to fumigate, call a licensed exterminator who can do so without putting anyone in your home at risk. They can help you layout a good fumigation plan and block future infestations.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

WaterSense Label

Monday, May 30th, 2011

Many people know about the EPA’s EnergyStar certification, which is a third-party certification system that verifies manufacturers’ claims about the energy efficiency of home appliances. The EnergyStar label has helped hundreds of thousands of consumers choose high-efficiency, cost-effective appliances for their homes.

The EPA has also developed a certification for plumbing fixtures, called WaterSense. WaterSense labels can be found on a variety of products, including:

  • Bathroom sink faucets and accessories
  • Showerheads
  • Toilets

While there are specific guidelines for each category of plumbing fixture, in general, the WaterSense label indicates that the product is at least 20% more efficient than conventional products in its category, without sacrificing performance or comfort.

The goal of the WaterSense guidelines is to make a real difference in the amount of water consumed in the U.S.  - and the numbers bear this out. Let’s take a look at what would happen if every household in the US installed WaterSense products in their bathrooms.

If every household in the U.S. installed WaterSense bathroom sink faucets, it would save 60 billion gallons of water and $600 million in water heating costs. If every U.S. household put in WaterSense showerheads, the US would use 250 fewer billion gallons of water annually and save $2.5 billion in water heating costs. And if every household in the US upgraded to a new, efficient WaterSense toilet, it would save 640 billion gallons of water a year.

More realistically, even if only 1 in 10 U.S. households upgraded to WaterSense products, we would save about 74 billion gallons of water a year and $1.5 billion on our water heating bills.

Like EPA EnergyStar products, WaterSense products can be found at most plumbing retailers.

The WaterSense label can also be applied to entire homes. Homes that have the WaterSense label have:

  • Efficient hot water systems that deliver hot water quickly to minimize waste and waiting
  • WaterSense plumbing fixtures
  • EnergyStar dishwashers and clothes washers
  • Regionally appropriate outdoor landscaping that requires minimal maintenance and watering

In addition, landscaping professionals can apply for WaterSense certification to show that they have training in water-efficient irrigation system design, installation, maintenance, and auditing.

Tags: , , ,
Posted in Energy Savings | Comments Off

Save Money When Using Appliances and Home Electronics

Friday, April 1st, 2011

As you are looking around your home for ways to save money on electricity, it is only natural to linger on the big things like your heating and air conditioning systems. However, there is also a lot to be saved in other areas if you know where to look and how to go about cutting back. Both the type of appliances that you buy and the way that you use them will directly impact your total electric bill every month, so it is certainly worth paying attention to what you are doing and what you could do better.

For one thing, it is almost always worth it to go with an Energy Star certified appliance whenever possible. It does not matter if it is a coffee maker or a washing machine. Every little bit helps and so you will be setting yourself up for much lower electric bill over time when you figure total energy usage into all of your purchases.

Using power strips is also a great way to make saving on electricity easy. No matter what you do, many appliances will draw a small amount of power even when they are switched off. So as long as things like your laptop, TV and toaster are plugged in, they are draining energy whether you are using them or not.

Of course, you could just go around and unplug everything you are not using, but that can get pretty tedious. Plugging these types of appliances and home electronics into a power strip makes it easy to just cut their power supply completely when you do not need them. And switching them back on again is just as easy. You do not even have to go crawling around on the floor looking for the plug.

There are certainly many items that you cannot or do not want to unplug or completely cut the power to at any time. For appliances and electronics that fall into that category, simply make sure you turn them off completely when they are not in use. Many home electronics will automatically switch to a standby mode rather than shutting down completely and it is easy to forget they are still on. However, you will save a lot if you make sure to shut them down completely when they are not in use.

Tags: , , ,
Posted in Energy Savings | Comments Off