Posts Tagged ‘Seminole’

Steps to Take Before Turning on Your Furnace: Some Advice from a Carollwood Heating Contractor

Tuesday, November 22nd, 2011

You are feeling a chill in the air in Carollwood. The outside temperatures are going down each day and the nighttime temperatures are forcing you to break out the flannel pajamas, robes, and blankets. It’s getting cooler and you are holding off turning on your furnace for the first time of the season, maybe because you envision high utility bills or you are afraid of what you’ll hear, feel, or see coming from your furnace after several months of inactivity.

There’s not much you can do to control higher utility bills, they are like death and taxes. But there are some things you can do to take the ‘mechanical anxiety’ out of turning on your furnace for the first time.

You can’t go back in time but you may want to consider ‘summerizing’ your furnace after you shut it down in preparation for the cooling season – or during the cooling season. Have a qualified heating and cooling technician give your furnace an inspection and cleaning.

A preseason inspection and cleaning will prevent some problems that may affect some of your senses later on. For example, a smell coming from your furnace may indicate a burning or smoldering electrical component. A noise may indicate a noisy fan or a loose belt, causing poor or no airflow. Touching your ventilation system and feeling for any vibration can indicate poor airflow. Visually checking your instruments like thermostats for verifying proper temperatures or a digital readout on our carbon monoxide alarm for any traces of harmful gas are also important to furnace start-up.

If something goes wrong, don’t blame it on your thermostat or the cold weather; blame it on a lack of preventive maintenance. Your best bet is to have a qualified service technician do a clean and inspection – to minimize any surprises at start-up and to keep you and the occupants of your home comfortable and safe while your furnace begins another season of hard work.

Worst Rooms in Your Aripeka Home to Collect Allergens

Monday, November 7th, 2011

Your Aripeka home may be a haven for allergens, and some rooms in particular are much worse than others. They are damp. They are warm. They often have garbage in them. These are the rooms that need especially close attention when trying to maintain air quality in your home.

Bathroom

Bathrooms are allergen havens for two reasons. They are filled with moisture, and without proper ventilation they will soon be filled with mold and mildew. Additionally, when not cleaned regularly they can house buildups of hair, skin, and other dust building residue that tend to trigger allergies.

The easiest way to handle this problem is to clean your bathroom regularly and make sure it is properly ventilated. Short of an exhaust fan in your bathroom, keep the door and windows open to help it dry faster.

Kitchen

Your kitchen produces allergens like mold and mildew due to the presence of garbage and fruit. It can also attract bugs and the dirt that accrues from people passing through constantly. Pets tend to eat in the kitchen, leaving behind dander. Additionally, plants and vegetables in the kitchen release pollen that circulates through your home to trigger additional allergies. Exhaust from cooking and smoke can also be a harmful allergen trigger.

The kitchen should be kept well ventilated and clean at all times. Check for any gaps in your insulation and have your exhaust fan and hood cleaned regularly to avoid backups of smoke or gas.

Allergens are everywhere in your home – with careful attention, however, you can stop them from affecting your family negatively.

Happy Halloween Weekend! (and Why to Clean Your Air Ducts)

Friday, October 28th, 2011

Happy Halloween from everyone at Air National! We hope you have a fantastically spooky time! And to make sure you have nothing scary in the your air ducts, it is a great time to think about having them cleaned.

You know it’s important to keep your air ducts clean in your St. Petersburg home, but why? Many people ask that question, and it’s important to understand why you are doing such a chore so that it has a purpose.

Actually, there is no one reason why your air ducts need to be kept clean – there are several, all of which are connected to one another. Here are five of them for you to consider:

  • Efficiency: Clean air ducts allow the air to flow through much easier and more readily, so your furnace or air conditioner won’t have to work as hard to ventilate the house. This makes for more efficient operation and lower energy consumption.
  • Performance: When your HVAC system does not have to work as hard to push air through the ductwork, it will perform better. Your home will be more comfortable and better ventilated.
  • Longevity: Because your HVAC system is operating more efficiently, it will be able to perform at a high level for a longer period of time. Well-maintained systems last longer than those that are not taken care of, and cleaning the ducts is part of good HVAC maintenance.
  • Savings: Clean ducts can save you a lot of money over time. Your energy bills will be lower because of how efficiently the whole system is running. You will spend less on maintenance and repair costs, because the system is being well-maintained. And, as an added bonus, your ducts will last longer because of the decreased risk of corrosion and damage from being dirty.
  • Health: Last, but certainly not least, clean air ducts mean clean air, which is important for your health and your family’s health. Especially if you have pets, if you smoke or live with a smoker, or if anyone in the house has allergies or asthma, cleaning your air ducts is a must. You could even include the decreased frequency of doctor visits under the savings mentioned above!

Clean air ducts go a long way toward making your home a pleasant place to live, as well as making home ownerships as worry-free as possible. Yes, it entails some extra work and/or expense, but in the end the benefits far outweigh the cost.

4 Ways to Improve IAQ and Reduce Air Pollution: A Guide From Sydney

Wednesday, October 5th, 2011

Your Sydney home could be a haven for pollutants that can cause irritation to the upper respiratory system of anyone who comes inside. These allergens and pollutants are easy to remove however by taking some simple steps such as the four listed below:

  1. HEPA Filtration: Step one is to use HEPA filtration to remove as much of what is on the floor as possible through vacuuming. HEPA vacuum cleaners can remove years of cleaners, solvents, dander, mineral build ups and other toxins that tend to accumulate in spaces that normal vacuums cannot reach. It may be a bit of an investment, but a high powered vacuum cleaner can have a tremendously positive impact on your lifestyle and reduce pollutants.
  2. Stop Outside Stuff from Coming In: Some of the worst pollutants your home will face are from outside. So, make sure you have doormats at every door and that your family and friends remove their shoes before coming inside. You can have a second mat inside as a friendly reminder that cleaning the shoes is not an option but a strict necessity.
  3. Humidity Helps: Humidity levels between 30% and 50% reduce the presence of dust mites, molds, bacteria and many other indoor pollutants. Air conditioning in the summer is helpful to reduce humidity, though a dehumidifier is recommended for those days when the temperature doesn’t justify full blown air conditioning. Additionally, look for sources of excess humidity like leaky pipes, standing water, or clothes drying.
  4. Cut the Chemicals: There are a number of high quality household cleaners that don’t contain chemicals. Avoid ammonia, bleach and other chemical laden cleaners that can inflame allergies and pollute the water supply. Your home will be just as clean and you won’t feel uncomfortable afterwards.

Proper cleaning and careful selection of compounds and what goes into your air will help you avoid creating new air quality problems in the house. Done right, this process will make everyone in your home feel more comfortable.

The Room by Room Benefits of Ductless Splits AC: A Tip From St. Petersburg

Wednesday, August 17th, 2011

Ductless splits air conditioners are designed to eliminate the need for ductwork in a house where space is at a premium, as in some St. Petersburg homes. Usually homeowners with older homes – those built before the 1970s – have very little space to work with when it comes to installing the ductwork a traditional central air conditioning system requires. These homes are often heated with radiant boiler systems and have window units to provide cooling in warmer weather. As a result, cooling costs can be extremely high each summer and the house usually isn’t comfortable during these months.

Ductless air conditioning offers a solution to most of these problems. Not only does the technology not require ductwork to be installed; it allows for multiple in-room units on a single compressor and it costs significantly less to operate compared to window AC units.

Ductless System Specifications

Ductless air conditioning systems consist of two major components: a compressor which is placed outside and indoor evaporators. With the use of inverter technology, these systems can support multiple evaporators – usually as many as four to a single condenser. This means you can have a single outdoor unit supporting cooling four separate rooms of your home at the same time.

Each of those indoor evaporators acts as a heat pump, allowing you to both heat and cool the room year round. And because the only connection needed between evaporator and condenser is a single refrigerant line, the cost of installation is significantly lower than it would be for a ductwork based central AC system.

Room by Room Benefits

While the primary benefit of a ductless system is the fact that it allows you to install air conditioning in multiple rooms of your house without the need for ductwork, there are other benefits. Not only do you get a much higher energy efficiency rating than you would with traditional window units (many ductless systems are rated at 16 SEER or higher while window units are frequently as low as 10 or 11), but you can control each unit individually. So if a room upstairs doesn’t need to be cooled during the afternoon hours, simply turn off the thermostat in that part of the house and save money.

There are some factors to consider when installing a ductless system. How many rooms do you need cooled? How warm does it get in the summer? Will the system be used for heating in the winter? These are all things you may want to discuss in greater detail with your contractor when you call for an estimate.

My HVAC System Has a 10 Year Warranty: Why Do I Need a Maintenance Agreement?

Monday, July 4th, 2011

While every new furnace sold comes with a limited 10 year warranty for the unit and parts, it is a good idea to supplement your warranty with a more complete maintenance agreement with your HVAC provider. Why pay for a secondary maintenance plan when you already have a warranty?

For the most part, the limited warranty provided by the manufacturer is meant to cover things like faulty parts, abnormal breakdowns or recalls. If your system simply needs to get a checkup because you use it a lot or there is a clog that isn’t caused by the actual furnace or air conditioner, you will likely end up paying the maintenance cost. So, by paying for an upgraded service plan, you cover all potential breakdowns and you’ll never again need to worry about your system. It’s like getting the upgraded warranty for a new car that covers everything from a busted crankshaft to old windshield wipers.

Help Your System Last Longer

Another benefit of a maintenance agreement for your HVAC system is that the system lasts longer when it is regularly maintained. The best maintenance agreements come with unlimited checkups and service visits, any day of the week, any time. So, if you think your system is running poorly, call a professional in to check it out and it won’t cost you anything. The ability to do this will ensure your HVAC system lasts significantly longer than if you were forced to wait until you could afford an extra visit from your repair man.

So, not only do you ensure your system keeps working, you add a lot of valuable years to its lifespan. Imagine how much money you’ll save if your furnace or air conditioner lasts for 20+ years instead of just 10. Any breakdowns after the 10 year mark would require hefty repairs or replacement since your warranty is expired. So, it’s in your best interest to keep your system running smoothly throughout its lifespan.

Ultimately, an HVAC system is only as good as what you put into it. If you’re careful about your investments and are willing to spend a little extra now, you’ll stand to benefit far more in the future from a smoothly operating, efficient heating system.

Save Money When Using Appliances and Home Electronics

Friday, April 1st, 2011

As you are looking around your home for ways to save money on electricity, it is only natural to linger on the big things like your heating and air conditioning systems. However, there is also a lot to be saved in other areas if you know where to look and how to go about cutting back. Both the type of appliances that you buy and the way that you use them will directly impact your total electric bill every month, so it is certainly worth paying attention to what you are doing and what you could do better.

For one thing, it is almost always worth it to go with an Energy Star certified appliance whenever possible. It does not matter if it is a coffee maker or a washing machine. Every little bit helps and so you will be setting yourself up for much lower electric bill over time when you figure total energy usage into all of your purchases.

Using power strips is also a great way to make saving on electricity easy. No matter what you do, many appliances will draw a small amount of power even when they are switched off. So as long as things like your laptop, TV and toaster are plugged in, they are draining energy whether you are using them or not.

Of course, you could just go around and unplug everything you are not using, but that can get pretty tedious. Plugging these types of appliances and home electronics into a power strip makes it easy to just cut their power supply completely when you do not need them. And switching them back on again is just as easy. You do not even have to go crawling around on the floor looking for the plug.

There are certainly many items that you cannot or do not want to unplug or completely cut the power to at any time. For appliances and electronics that fall into that category, simply make sure you turn them off completely when they are not in use. Many home electronics will automatically switch to a standby mode rather than shutting down completely and it is easy to forget they are still on. However, you will save a lot if you make sure to shut them down completely when they are not in use.